Edit NexPhase

NexPhase Demo

Edit NexPhase: Pepperell Park

NexPhase name

Must be 1 - 40 characters long

NexPhase type

Required, select NexPhase type

Latitude

Optional, -90.0 - 90.0

Longitude

Optional, -180.0 - 180.0

Hydrocarbon sensor

Check if NexPhase has a hydrocarbon sensor

Flooding sensor

Check if NexPhase has a flooding sensor

Stale charger warnings

Check if NexPhase should intermittently check and warn if a charger has not had a transaction recently

Stale charger hours

1 - 1000 hours, time since last transaction before a charger is considered stale

Modules

Relay Controller

Enable and configure the Relay Controller module

Relay ID

Must be in the format 00-0000-0000-0000-00

MQTT password

12-36 characters including one of each: A-Z, a-z, 0-9, -_!&@?*+.()

Confirm password

Must match the password above

DTM Input

Enable and configure the DTM Input module

DTM ID

Must be in the format 00-0000-0000-0000-00

MQTT password

12-36 characters including one of each: A-Z, a-z, 0-9, -_!&@?*+.()

Confirm password

Must match the password above

HMC

Enable and configure the HMC module

HMC ID

Must be in the format 00-0000-0000-0000-00

Change MQTT password

Displays and allows MQTT password configuration when enabled

MQTT password

12-36 characters including one of each: A-Z, a-z, 0-9, -_!&@?*+.()

Confirm password

Must match the password above

Charger 1

Enable and configure Charger 1

Charger name

Must be 1 - 40 characters long

Charger specification

Manufacturer

Must be 1 - 40 characters long

Model

Must be 1 - 40 characters long

Separate connection

Check if charger has a separate 120 V connection

Tilt sensor

Check if charger has a tilt sensor

DTM ID

Must be in the format 00-0000-0000-0000-00

MQTT password

12-36 characters including one of each: A-Z, a-z, 0-9, -_!&@?*+.()

Confirm password

Must match the password above

Charger 2

Enable and configure Charger 2

Charger name

Must be 1 - 40 characters long

Charger specification

Manufacturer

Must be 1 - 40 characters long

Model

Must be 1 - 40 characters long

Separate connection

Check if charger has a separate 120 V connection

Tilt sensor

Check if charger has a tilt sensor

DTM ID

Must be in the format 00-0000-0000-0000-00

MQTT password

12-36 characters including one of each: A-Z, a-z, 0-9, -_!&@?*+.()

Confirm password

Must match the password above

Charger 3

Enable and configure Charger 3

Charger name

Must be 1 - 40 characters long

Charger specification

Manufacturer

Must be 1 - 40 characters long

Model

Must be 1 - 40 characters long

Separate connection

Check if charger has a separate 120 V connection

Tilt sensor

Check if charger has a tilt sensor

DTM ID

Must be in the format 00-0000-0000-0000-00

MQTT password

12-36 characters including one of each: A-Z, a-z, 0-9, -_!&@?*+.()

Confirm password

Must match the password above

Charger 4

Enable and configure Charger 4

Charger name

Must be 1 - 40 characters long

Charger specification

Manufacturer

Must be 1 - 40 characters long

Model

Must be 1 - 40 characters long

Separate connection

Check if charger has a separate 120 V connection

Tilt sensor

Check if charger has a tilt sensor

DTM ID

Must be in the format 00-0000-0000-0000-00

MQTT password

12-36 characters including one of each: A-Z, a-z, 0-9, -_!&@?*+.()

Confirm password

Must match the password above

Cancel